Mold Trials & Acceptance

Mold Trial Material Qualification: What Resin Should the T1 Actually Run On?

septembre 2, 2026
Last updated: 2026-09-04 · 5 min read Mold Trial Material Qualification: What Resin Should the T1 Actually Run On? A…
阅读更多 →

Mold Trial Press Matching: Why Does the Trial Machine Have to Match Production?

septembre 2, 2026
Last updated: 2026-09-04 · 5 min read Mold Trial Press Matching: Why Does the Trial Machine Have to Match Production?…
阅读更多 →

Weighing Cavities at Trial: How Balanced Is Your Multi-Cavity Mold, Really?

septembre 2, 2026
Last updated: 2026-09-04 · 5 min read Weighing Cavities at Trial: How Balanced Is Your Multi-Cavity Mold, Really? Cavity balance…
阅读更多 →

What Cpk Number Should You Demand? — Process Capability as the Language of Mold Acceptance

septembre 2, 2026
Last updated: 2026-09-04 · 5 min read What Cpk Number Should You Demand? — Process Capability as the Language of…
阅读更多 →

T1 First Article Inspection — What Do You Measure and Document After the Mold Trial to Decide Whether the Mold Is Ready for Mass Production?

septembre 2, 2026
Last updated: 2026-09-04 · 5 min read What Should You Prepare Before a Mold Trial? — The Pre-Trial Checklist A…
阅读更多 →

What Should You Prepare Before a Mold Trial? — The Pre-Trial Checklist

septembre 2, 2026
Last updated: 2026-09-04 · 5 min read Should Metal Inserts Go In the Mold? — In-Mold Nuts, Threads and Their…
阅读更多 →

What Is a Run-at-Rate Test? — Proving a Mold Holds Production Speed Before You Accept It

septembre 2, 2026
Last updated: 2026-09-04 · 6 min read What Is In-Mold Assembly? — Bonding Inserts and Joining Parts Inside the Cycle…
阅读更多 →

How Do You Read a T1 Dimensional Report? — Turning the First CMM Data Into Accept-or-Correct Decisions

septembre 2, 2026
Last updated: 2026-09-04 · 6 min read How Does a Two-Shot (2K) Mold Make Two Materials in One Tool? —…
阅读更多 →

Mold Factory Acceptance Test (FAT) — What Must Be Proven Before a Mold Ships, and What Do You Sign To Say It Passed?

septembre 2, 2026
Gas-Assist Injection Molding — How Does Hollowing a Part with Nitrogen Save Weight, Remove Sinks and Cut Clamping Force? Last…
阅读更多 →

Color Match Approval at Mold Trial — How Is Delta E Measured and Specified for Molded Parts, and What Drives Color Drift Shot to Shot?

septembre 2, 2026
Conformal Cooling in Injection Molds — How Do 3D-Printed Cooling Channels That Follow the Part Shape Cut Cycle Time and…
阅读更多 →

Mold Commissioning Checklist — What Must You Verify When a New Mold Arrives at Your Facility, and How Do You Confirm It Runs on Your Machines?

septembre 2, 2026
Microcellular Foam Injection Molding (MuCell) — How Does a Supercritical Gas Cut Weight, Warpage and Clamp Force, and When Does…
阅读更多 →

Mold Trial Shot Review — How Do You Evaluate the First Shots from a New Mold, and What Defects Must Be Fixed Before the Mold Is Accepted?

septembre 2, 2026
Clamp Force Tonnage for Injection Molding — How Do You Calculate the Required Tonnage, and What Happens When the Machine…
阅读更多 →